HY16F19
Product Features
- Digital Features:
- Andes N801 32-bit MCU
- One instruction per clock cycle
- C complier & graphical development tool chain
- 2.2V to 3.6V operating voltage range
- -40℃ to 85℃ operating temperature range
- Low power operation:
- Run mode:0.6mA@CPU_CK=2MHz/2
- Speed mode:5μA@LSRC=35KHz
- Sleep mode:Typ.2.5μA
- 64K bytes eFlash Memory
- 8K bytes SRAM
- Various timer (Support 4 channel 16-bit PWM)
- 8-bit/16-bit timer
- Multi-type PWM controller
- Compare and capture function
- Support EUARTx2/32-bit SPI/I2C(Master and Slave two communication modes) interface.
- The hardware RTC supports calendar functionality (year/month/day/hour/minute/second and the alarm)
- Supports up to 24+34 programmable digital IO function pin
- 24 pins are GPIO pin
- 34 pins are shared from LCD I/O pin
- Andes N801 32-bit MCU
- Analog Features:
- An ultra low noise 24-bit ΣΔADC
- Input referred noise down to 65nV
- Optional 10/20/41/81/163/326/651/1302/2604/5208/10417Hz@ADCK=333KHz conversion rate of SPS
- Input amplification gain up to 1~128
- Supports the following four CPU oscillator frequency:
- External High Speed Oscillator Max ,Up to 2MHz~16MHz@VDD3V
- External Low Speed Oscillator Mode (LSXT)32768Hz
- Internal High Speed Oscillator Max (HSRC),Optional 2MHz、4MHz、8MHz、16MHz
- Internal Low Speed Oscillator (LSRC) 35KHz
- Power management
- Charge pump regulation
- Built-in selectable voltage
- 1.2V bandgap reference output
- A 8-bit DAC
- Monotonic guarantee
- A rail-to-rail operation amplifier
- 1MHz bandwidth, higher than 90dB gain
- Programmable configuration: unit gain buffer, integrator…etc
- Multi-function comparator
- 16 level low battery detection
- 8 touch key circuit support
- 2μS De-Glitch filter
- 4×36~6×34 LCD driver
- Support 1/3, 1/4, 1/5, 1/6 duty @ 1/3 bias mode
- Support R Type driver
- Built-in Charge Pump voltage regulator circuits provide paragraph 5 of VLCD bias,3.43V,3.16V,2.93V,2.73V,or 2.55V
- An ultra low noise 24-bit ΣΔADC
Product Specifications
Model No. | VDD (V) |
Internal Clock (Hz) |
System Clock (Hz) |
Flash Memory (byte) |
Data Memory (byte) |
ADC ENOB (bit x ch.) |
Sample Rate (sps) |
TPS | OPAMP (type x ch.) |
Touch Key |
DAC | Charge pump |
RTC | LCD (com x seg) |
I/O | Timer | PWM (bit x ch.) |
Serial Interface |
ISP Mode |
Package | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8-bit | 16-bit | ||||||||||||||||||||
HY16F196B | 2.2~ 3.6 |
35K 2M 4M 10M 16M |
32K~ 16M |
16K | 2K | 21-bitx8 | 10~ 10k |
Y | R2Rx1 | 6-CH | 8bits | Y | Y | 4×24 or 6×22 | 20+22** | – | 3 | 8-bit x4, 16-bit x2 |
EUART I2C 32b SPI |
Y | LQFP64 |
4×28 or 6×26 | 20+26** | QFN68 | |||||||||||||||||||
HY16F197B | 2.2~ 3.6 |
35K 2M 4M 10M 16M |
32K~ 16M |
32K | 4K | 21-bitx5 | 10~ 10k |
Y | R2Rx1 | 6-CH | 8bits | Y | Y | 4×26 or 6×24 | 20+24** | – | 3 | 8-bit x4, 16-bit x2 |
EUART I2C 32b SPI |
Y | LQFP64 |
4×30 or 6×28 | 20+28** | QFN68 | |||||||||||||||||||
HY16F198B | 2.2~ 3.6 |
35K 2M 4M 10M 16M |
32K~ 16M |
64K | 8K | 21-bitx6 | 10~ 10k |
Y | R2Rx1 | 8-CH | 8bits | N | Y | 4×26 or 6×24 | 24+24** | – | 3 | 8-bit x4, 16-bit x2 |
EUART I2C 32b SPI |
Y | LQFP64 |
21-bitx8 | Y | 4×36 or 6×34 | 24+34** | LQFP100 QFN88 |
Remark:
ADC:24-bit Sigma Delta ADC
OPAMP:R2R (Rail-to-Rail Amplifier).
TPS:Internal temperature sensor.
RTC:Support external 32768Hz crystal oscillator and hardware RTC(Real Time Clock) and calendar function.
ISP Mode:Support ISP(In-System Programming) function by software.
LCD:Support 4COM or 6COM.
I/O:20+26, it indicates that the product with 20x GPIO and 26x LCD SEG Port multiplexed with GPIO function.
Timer:Timer A(16-bit) support multi-segment interrupt time setting; Timer B(16-bit) support PWM function, PWM output can be selected as 8-bit or 16-bit; Timer C (16-bit) support Capture Compare function.
*:Through the multiplexer switch can be used as analog input channels.
**:LCD pin shared I/O.
Product Application Notes
Model No. | Description | User Manual | Application
Source Code |
Product
Videos |
---|---|---|---|---|
UG-HY16F198B | HY16F19 Series User’s Guide | Version 03 | – | |
APD-HY16F012 | HY16F198 AC Current Measure | – | Version 11 | |
APD-HY16F013 | HY16F198 High Precision Kitchen Scale | – | Version 03 | |
APD-HY16F019 | HY16F198B Glucose Meter | – | Version 01 | |
APD-HY16F021 | HY16F198B High Precision Pricing Scale | – | Version 01 | |
APD-HY16F022 | HY16F198B Voltage Current Meter | – | Version 01 | |
APD-HY16F023 | HY16F198B RTC Clock Calender | – | Version 01 | |
APD-HY16F024 | HY16F198B Touch Key TPS Thermometer | – | Version 01 | |
APD-HY16IDE008 | HY16F19 Series IP User’s Manual | Version 03 | Version 03 | |
APD-HY16IDE010 | HY16F Series IDE Software Optimun Instruction Manual | Version 01 | – | |
OJTI-HM-2013-002 | QFN/DFN PCB pad design and welding production process considerations | – | – |
Tools & Software & Document Download Page
Model No. | Description | Software | Software User Manual | Hardware User Manual | Training Videos |
---|---|---|---|---|---|
HY16F19x-DK04 | HY16F19 Series In-Circuit Emulator | – | – | Version 03 | |
HY16F Series IDE | HY16F Series IDE software | Version 2.1.1p3 | Version 11 | – | |
HY16F Series Device | HY16F Series Device driver installation package (need to install HY16F Series IDE software first) | Version 0.2 | Version 11 | – | |
HY16F Writer | HY16F Series Writer software | Version 2.3 | Version 09 | – | |
HY10000-WK08C | Integrated Writer, support HY10P/11P/HY12P/HY13P/HY15P/HY16F series product | Version 1.5 | Version 02 | – | |
HY16F19x-DS01 | HY16F198B Starter Kit | Version 6.7.5 | – | Version 01 | |
HY16F Bootloader | HY16F Series ISP Bootloader software | Version 1.1 | Version 01 | – | |
HY16F19x-AK01 | HY16F19 Series ΣΔADC ENOB Test Tool | – | – | – | |
HY16F19 Series C Library | HY16F19 Series Peripheral Driver C Library | Version 1.3 | Version 13 | – |