HY10P
Applications
- PIR(Pyroelectric infrared-detector)
- Smart Pressure Sensor
- Charger
Product Features
- Operation voltage and Temperature range
- VREGIN：4V ~ 24V
- VDD：2.2V ～ 3.6V
- – 40°C ～ 85°C
- 8-bit RISC architecture
- Support external crystal oscillator up to 32768Hz
- Built-in precise 2/4/8MHz RC oscillator
- Low, 0.65μA (typ.) sleep current
- Built-in EPROM 64 word
- IIC interface
- 24-bit fully differential ΣΔ analog-to-digital converter (ADC)
- Ultra low input referred noise 300nVrms
- ENOB up to 21-bit
- Conversion rate up to 7.8KSPS
- 8 measurement signal input channels
- Fully- differential input signal and zero adjust of measurement range
- x1/4, x1/2, x1, x2, x4, x8, x16 programmable gain amplification
- Gain drift < 5ppm/℃
- Timer
- Watch Dog
- 8-bit Timer
HY10P Series
| Model No. | VDD | Internal Clock |
System Clock |
Program Memory (word) |
Data Memory (byte) |
Built-in EPROM (word) |
ADC ENOB(bit x ch.) |
Sample Rate(sps) |
I/O | Timer | PWM | Serial Interface |
Package | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-bit | 16-bit | |||||||||||||
| HY10P40* | 2.2V~ 3.6V |
14KHZ 2MHZ 3.8MHZ 7MHZ |
14KHZ~ 7MHZ |
2k | 128 | 64 | 20-bitx6 | 8sps~ 1953sps |
1xI+6xIO | 1 | 1 | 8-bit x2, 16-bit x1 |
IICX1 | MSOP10 |
| 20-bitx4 | 1xI+4xIO | SOP8(EP) | ||||||||||||
| 20-bitx8 | 1xI+8xIO | SSOP16 | ||||||||||||
Applications:
ADC：24-bit Sigma Delta ADC
Timer：Timer A(8-bit) support multi-segment interrupt time setting; Timer B(16-bit) support PWM function,
PWM output can be selected as 8-bit or 16-bit.
*：H08B instruction, the main difference is that the instruction set does not contain 8×8 hardware multiplier, 16-bit table read instruction, conditional skip instruction and stack manipulation instructions.
Product Application Notes
Tools & Software & Document Download Page
